Description You need big fuel volumes for high output Methanol and or Nitromethane engines? BA has you covered with a range of High Volume Rebuildable Injectors, 100% Engineered and Manufactured in the USA! We characterize the injectors we sell on our State of the Art Dynamic Injector Flow Bench. We test the injectors as a set and provide the data required to run them correctly. Peak and Hold drive settings as well as Slope (Max Dynamic Flow) and the Offset (Dead Time / Battery Comp) due to Pressure and Battery Voltage. This Injector Nominally Flows 7100 cc/min (1.87 GPM) at 100 PSI Differential Pressure and 7700 cc/min (2.025 GPM) at 140 PSI Differential Pressure** Compatible with All Known Fuels **Pressures above 100 PSID are not recommended unless you have a Programmable Peak and Hold Drive like the MoTeC MX00 and M1 Series ECUS, otherwise it is likely for the injector to not open all the way or at all under very high pressures. It is also not possible without at least 14 volts.
